1. Please confirm whether the Bluetooth of the mobile phone is turned on and make sure that no other mobile phone has connected to the device. 2. Please check whether the device model is selected correctly in the APP search interface. 3. Restore the machine to factory settings and restart the Bluetooth of the mobile phone. Some Android phones need to turn on GPS positioning. 4. If the device is not found, you can go to the system settings to perform Bluetooth detection. If the system also does not search for the device, it is a hardware problem; if it can be searched, you can try to cancel the pairing and pair it again. 5. It is recommended to uninstall and reinstall the APP and then test the connection. 6. It is recommended to change other mobile phones to search and connect for a second attempt. 7. If the above problems are eliminated, it is a printer failure. Please contact after-sales customer service to send it back for processing.

1. Try calibrating the paper feed via Bluetooth connection to the printer through the NIIMBOT APP. Specific steps: APP homepage - My - My Hardware - Paper Feed Calibration (select the corresponding paper type). 2. Please reset the template, ensuring the correct paper type is selected, then restart the printer and connect to print. 3. If the above methods fail, it is preliminarily determined to be a hardware malfunction. Contact customer service for assistance in returning the printer.

1. Please connect the power cord to the corresponding mobile phone to charge and test whether the power cord is normal. 2. If the power cord is damaged, please replace the power cord and charge again. 3. If the power cord is normal and still cannot charge, it is a printer failure. You can contact after-sales customer service for communication and processing.

1. Please check whether the box cover is closed tightly. 2. You can try to open the printer paper slot box cover and then close the cover. 3. If the above methods are unsuccessful, it can be preliminarily judged that the printer is faulty and you can contact after-sales customer service for communication and processing.

1. Please confirm whether the label paper is installed correctly and whether the label paper type is matched. 2. If the label paper is installed correctly, you can confirm whether the self-test page is printed normally by printing the self-test page. How to print the self-test page: Turn on the machine--quickly and shortly press the power button twice, and the machine prints the self-test page. 3. If the self-test page displays normally, please check whether the APP software settings are correct. 4. If the self-test page also displays abnormalities, it is a printer failure. Please contact after-sales customer service to send it back for processing.

1. Please check if you are using genuine NIIMBOT label supplies (genuine NIIMBOT label supplies all have RFID tags). 2. Try rewinding the label paper, placing it back into the paper tray, and then printing a test. 3. Try opening the printer paper tray cover and then closing the cover. 4. Print a self-test page (refer to the printed label content). 4.1 P≥L indicates that the label count limit has been exceeded. 4.2 Check the R value. If it is not displayed or displays ERR, it may be a machine malfunction or a faulty RFID chip in the supply. 4.3 Try printing a self-test page again with a different roll of encrypted supply. If the problem persists, please provide a photo of the self-test page information and the RFID batch number of the supply to customer service for assistance.

1. Please check whether the label paper is installed correctly. 2. Please check in the software whether the paper type is incorrectly selected. 3. Check whether the APP template is incorrectly selected or the size and printing direction are incorrectly set, resulting in printing deviation. 4. If the above faults are excluded, it is initially judged to be a printer failure. You can contact after-sales customer service for communication and return processing.

1. Please confirm that you are using genuine NIIMBOT consumables (all NIIMBOT consumables have RFID tags). 2. You can click the printer power button to recalibrate the paper feed. 3. Please rewind the label paper and place it back into the paper tray, positioning it to the left, for testing. 4. Print a self-test page (refer to the printed label content). 4.1 P≥L indicates that the number of labels has exceeded the limit. 4.2 Check the R value. If it is not displayed or displays ERR, it may be due to a machine malfunction or a faulty RFID chip in the consumable. 4.3 Replace the consumable and print a self-test page for a second test. If the above problems persist, please send a photo of the self-test page information and the RFID batch number of the consumable to customer service for return processing.